Honeywell RTH9585 - Setting the time;date; Setting the fan

Setting the time/date
1 Touch the current time. The screen displays
Set
Time/Set
Date.
2
Touch
Set
Time
or
Set
Date
.
3
Touch
.&.
or
T
until the proper time/date is
displayed.
4 Touch
Done
to save or
Cancel
to ignore
changes.
Note: This thermostat
will
automatically update
for daylight saving time (if observed
in
your
area) and
all
date/time information is stored.
If
the thermostat is connected to Wi-Fi and
registered to Total Connect Comfort, the current
time is updated from the internet.
Setting
the fan
1
Touch
FAN
to display fan settings.
2
Touch
On,
Automatic,
Circulate,
or
Follow
Schedule.
3
Note:
Follow
Schedule
option only appears
if the fan is set for
On
or
Circulate for one or
more program periods.Touch
Done
to save
and exit.
On:
Fan
is always on.
HOME
'
'·.
•
- INSIDE A
Prev1ous
Set
T1me
Menu
Set
Date
HOME
.
F~N
.
'~
.
·
..
Automatic:
Fan
runs only when the heating or cooling system is
on.
Circulate:
Fan
runs randomly about 35% of the time (home use
only).
Follow
Schedule: Follow Schedule
is not an option
if
all
programs
are set to
fan
auto (see pages 16-18).
Note: Touch
On,
Automatic,
or
Circulate to temporarily override the
programmed
fan
schedule.
15