Honeywell RTHL2310 series

Advanced Installation Guide
69 -2578ES — 01 14
SETUPWIRINGASSISTANCETROUBLESHOOTING
5
5
M32779
System setup
Change Function Change Setting
See pages 15–19 to change Function Settings.
Changing Settings
Function
Setting
1. Press the s or t button to change the setting.
2. Press the s and t buttons simultaneously for one
second to advance to the next function.
3. Press the Run button to exit and save settings.
NOTE: If you do not press any button for 60 seconds
while you are in the setup menu, the thermostat
automatically saves any changes made and exits the
menu.