To Next Page

To Previous Page

RTHL2510/RTHL2410

13 69-2579ES—01

About your new thermostat

Temporary

Wake

Set

M32708

Set

M32709

Program schedule override (temporary)

Press s or t to immediately adjust the

temperature. This will temporarily override

the temperature setting for the current

time period.

“Temporary” will appear on the display

and the current program period will flash.

The new temperature will be maintained

only until the next programmed time

period begins (see page 9).

To cancel the temporary setting at any

time, press RUN.

Press to temporarily adjust temperature.

Press to cancel temporary setting and

resume program schedule.

Note: Make sure the thermostat is set to the

system you want to control (heat or cool).

Honeywell RTHL2510C Operating Manual

Other manuals for Honeywell RTHL2510C