6. Terminal configurations
ScanPal EDA50 Enterprise Hybrid Device User Guide 61
4. Tap the name of the certificate or key storage to intall. Following the tips to
enter the password of the key storage, then tap OK.
5. Enter the certificate name and tap OK.
Disable or delete certificates
If the certificate is a stolen one or the organization selected by the user does not
trust the certificate, the user can disable or delete the certificate.
1. Enter Application Settings, tap Safety > Trusted Credentials. There are
two tabs in the Trusted Certificate screen:
• System tab displays CA certificates installed in ROM.
• User tab displays CA certificates installed by users.
2. Tap the certificate name to disable or delete it, and the certificate details
screen will pop up.
3. Slide the screen down to the bottom, tap Disable (system certificates) or
delete (user certificates).
If necessary, users can enable the disabled system certificate here. For
deleted user certificates, users must reinstall it to enable it again.
4. Tap OK.