Need help?Do you have a question about the Honeywell ScanPal 5100 and is the answer not in the manual?
General| Display diagonal | 2.4 \ |
|---|---|
| Display resolution | 240 x 320 pixels |
| Display number of colors | - |
| Flash memory | 0.128 GB |
| Internal memory | 0.064 GB |
| Internal memory type | RAM |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 32 GB |
| Processor family | PXA 300 |
| Processor frequency | 0.624 GHz |
| GPS (satellite) | No |
| Operating system installed | Windows CE 5.0 |
| Wi-Fi standards | 802.11b, 802.11g |
| Bluetooth version | 2.0+EDR |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Battery capacity | 3300 mAh |
| Battery life (max) | 8 h |
| Product color | Black, Grey |
| International Protection (IP) code | IP54 |
| Keypad number of keys | 28 |
Weight and Dimensions| Depth | 57 mm |
|---|---|
| Width | 157 mm |
| Height | 41 mm |
| Weight | 231 g |
Step-by-step instructions for installing the main battery pack.
Instructions for charging the main and backup batteries.
Procedure for starting the terminal for the first time.
Procedure for calibrating the touch screen stylus for accuracy.
How to install Micro Secure Digital (SD) memory cards.
Steps for changing the main battery pack.
Tips to prevent data loss and manage battery power.
Details about the 3.7V Lithium Polymer internal backup battery.
Procedures for soft and hard resets of the terminal.
How to suspend and resume terminal operation.
Adjusting memory allocation between file storage and programs.
Detailed technical specifications of the ScanPal 5100.
Types of image decoding supported: full-area and ALD.
Steps for decoding bar codes using the image engine.
Process for capturing digital images with the terminal.
Step-by-step guide to capturing an image.
How to install software programs on the terminal.
Setting up ActiveSync or WMDC for data synchronization.
Configuring the host workstation for synchronization.
Configuring the terminal's PC connection settings.
Installing software via ActiveSync or WMDC.
Steps to connect the terminal to a wireless network.
How to configure the WLAN radio settings.
How the HomeBase charges the terminal's battery.
Step-by-step guide to powering the HomeBase device.
How the HomeBase charges the main battery pack.
Steps to insert the terminal into the HomeBase for charging.
How to charge a spare battery in the HomeBase.
Checking battery status via the terminal's Power Properties.
Detailed technical specifications of the HomeBase device.
To Next Page