Honeywell ScanPal 5100 User Manual

2 - 1
2
Getting Started
Out of the Box
Verify that your carton contains the following items:
• ScanPal 5100 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
• Quick Start Guide
• Belt Clip
• Lanyard
Note: Be sure to keep the original packaging in case you need to return the ScanPal 5100 terminal for service; see
Product Service and Repair on page 11-1.
Step 1. Install the Main Battery
The ScanPal 5100 is shipped with the battery packaged separate from the unit. Follow the steps below
to install the main battery.
1. Remove the battery door by turning the screw clockwise to unlock the battery door.
2. Remove the battery door.

Honeywell ScanPal 5100 Specifications

General

Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Display number of colors	-
Flash memory	0.128 GB
Internal memory	0.064 GB
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	PXA 300
Processor frequency	0.624 GHz
GPS (satellite)	No
Operating system installed	Windows CE 5.0
Wi-Fi standards	802.11b, 802.11g
Bluetooth version	2.0+EDR
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	3300 mAh
Battery life (max)	8 h
Product color	Black, Grey
International Protection (IP) code	IP54
Keypad number of keys	28

Weight and Dimensions

Depth	57 mm
Width	157 mm
Height	41 mm
Weight	231 g