6. Terminal configurations
ScanPal EDA50 Enterprise Hybrid Device User Guide 63
4. (Optional) If the desired device is not listed, please check if the Bluetooth of
that device has been enabled and is detectable, and then tap Scan Device.
5. Select the device to pair with. After Pairing Dialog Box is displayed, enter
the device PIN code, and tap OK. When the device and the terminals have
been successfully paired, the device name will appear in the list of paired
devices at the top.
6. To disconnect with the paired device, tap the Quick Setting icon beside the
device name
, and then tap Cancel Pairing.
To Next Page
Loading...
