Honeywell SEF8M - User Manual

Back plate / Embase
arrière / Placa trasera /
Piastra posteriore
1
3
5
7
Spirit Level / Niveau à bulle /
Nivel de aire / Livella
Top Mounting hole /
Trou de montage supérieur /
Orificio de montaje superior /
Foro di montaggio superiore
Main board / Carte
principale / Placa principal /
Scheda principale
Mounting hole / Trous de montage /
Orificio de montaje / Foro di
montaggio
2
4
6
8
Piezo sounder / Avertisseur sonore
piézoélectrique / Componente
acústico piezoeléctrico / Sirena
piezoelettrica
Cover tamper / Contact d’autoprotection à
l’ouverture/ Antiforzamiento de
la tapa / Antimanomissione del
coperchio
Rear tamper / Contact
d’autoprotection à l’arrachement/
A
ntiforzamiento de la parte trasera /
A
ntimanomissione posteriore
Rear tamper extender /
Extension autoprotection arrière
/
A
largadera antiforzamiento
trasera / Estensione
antimanomissione
8 x 1,5V AA Lithium Batteries /
8 x piles AA 1,5 V au lithium /
8 pilas de litio AA de 1,5 V /
8 batterie AA al litio da 1,5 V
- 1 -

SEF8M - Installation Instructions
Wireless External Siren with Strobe
Radio board / Carte radio /
Placa de radio / Scheda radio
a b


a b

a b c

Honeywell SEF8M Specifications

General

Brand	Honeywell
Model	SEF8M
Category	Security System
Language	English

Summary

Introduction and Operations

Introduction to SEF8 M Siren

Details the SEF8M siren unit, its versions, and purpose for audible and visual signaling.

SEF8 M Operational Modes

Explains how the siren activates during intrusion, its sounder stop conditions, and monitoring by the control panel.

Installation and Configuration

Mounting Location Guidelines

Specifies ideal and unsuitable locations for mounting the siren for optimal performance and safety.

Siren Mounting Procedure

Step-by-step instructions for physically installing the siren unit onto a mounting surface.

SEF8 M Siren Registration

Procedure for associating the SEF8M siren with the control panel using a programming tool.

Alpha Radio Protocol Configuration

Details configurable parameters for the siren via the control panel's programming tool.

Maintenance and Specifications

Lens Removal and Fitting

Instructions on how to safely remove the existing siren lens and fit a new one of a different color.

Battery Replacement Guide

Step-by-step instructions for replacing the siren's internal batteries, including pre-replacement panel actions.

General Maintenance Practices

Covers periodic testing of sounder/strobe, checking tampers, cleaning, and battery replacement intervals.

Technical Specifications Overview

Lists key technical details including dimensions, weight, RF range, battery, voltage, frequency, and protocols.