LED Pattern
N/A
Tone
Two tone ascending sequence. If connected, device says, "louder."
TIP
When using the headset with Guide Work, only the tones are played.
Decrease volume
User Action
Press the Minus (-) button
Headset Mode
N/A
LED Pattern
N/A
Tone
Two tone descending sequence. If connected, device says, "softer."
TIP
When using the headset with Guide Work, only the tones are played.
Mute
NOTE
This applies to the SRX3 Headset only. This feature is not available on the
SRX2 Headset.
User Action
Flip microphone boom up 90 degrees (vertical)
Headset Mode
N/A
LED Pattern
N/A
23 SRX3 User Guide - Preliminary