Tone
N/A
Unmute
NOTE
This applies to the SRX3 Headset only. This feature is not available on the
SRX2 Headset.
User Action
Flip microphone down to mouth level.
Headset Mode
N/A
LED Pattern
N/A
Tone
N/A
Force disconnect for manual pairing in low power mode
User Action
With headset connected, press the Plus (+) and Minus (-) buttons
Headset Mode
Headset disconnects current pairing and enters low power pairing mode
LED Pattern
Solid green
Tone
No tone when entering mode. Three ascending tones upon pairing with a device
Switch to high power pairing when pairing in low power mode has failed
User Action
With headset in pairing mode, press the Plus (+) and Minus (-) buttons
SRX3 User Guide - Preliminary 24
To Next Page
Loading...
