To Next PageTo Next Page
Need help?Do you have a question about the Honeywell T822 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | T822 |
| Category | Thermostat |
| Language | English |
Lists items included in the thermostat package, such as the thermostat unit and wall anchors.
Lists tools and materials like screwdrivers, hammer, level, and drill bits needed before installation.
Describes the types of heating and cooling systems this thermostat is designed to control.
Outlines compatible system types (e.g., gas, oil) and available system/fan settings.
Specifies the adjustable temperature limits for the thermostat, from 45°F to 95°F.
Defines the acceptable operating ambient temperature and relative humidity ranges.
Provides physical measurements for both vertical and horizontal model installations.
Details the process of mounting the thermostat base to the wall, including drilling and anchoring.
Explains how to connect wires to the thermostat terminals for proper operation.
Defines the function of each terminal (R, W, Y, G) for system connections.
Recommends using 18-gauge thermostat wire and notes that shielded cable is not required.
Guides users on adjusting the heat anticipator setting for different heating systems (T822K only).
Instructions on how to align and snap the thermostat cover onto the installed base.
Explains how to use the fan switch (Auto/On) and system switch (Heat/Off).
Details how to adjust the thermostat to set the desired indoor temperature.
Outlines the terms and conditions of the product's limited five-year warranty.
Provides website and toll-free phone number for product assistance and customer support.
