Honeywell TH115-AF-GA - Permanent Override (Manual Mode)

TH115-AF-GA / TH115-AF-GB
17
ENGLISH
To place the thermostat in Manual mode, press Mode/Ret to display on the screen. In this mode, the
thermostat does not follow the programmed schedule. Press the , or button to set the
temperature.
In this mode, the thermostat uses the vacation preset temperature (see page 13). There are two ways to
place the thermostat in Vacation mode:
 Press the button on the thermostat. When the Vacation mode is activated this way, the icon
appears on the screen without flashing.
 From any remote control device equipped with a dry contact. When the contact closes, the thermo-
stat is placed in Vacation mode and the icon flashes on the screen. All buttons on the thermostat
are locked. When the contact opens, the thermostat returns to the previous mode.
NOTE: When the Vacation mode is activated from a remote control device, it can only be deacti-
vated using the device.
Permanent override of schedule (Manual mode)
When you go on vacation (Vacation mode)
400-115-051-B (Honeywell TH115-AF-GA_GB) 5 x 3.125 EFS.book Page 17 Monday, April 12, 2010 3:10 PM