PRO 2000 Series
13
ENGLISH
Adaptive Intelligent Recovery™ allows the thermostat to “learn” how long your furnace or air
conditioner takes to reach the set temperature. Simply program the desired times and desired
temperatures into the schedule. The thermostat will determine when to activate heating or cooling
so that the desired temperature is attained at the desired time.
Example: If you set the Wake time to 6 a.m. and the temperature to 70 °F (21 °C), the heat will
come on before the set time, so the temperature is 70 °F (21 °C) by the time you wake at 6 a.m.
Your thermostat has a feature that helps prevent damage to the compressor of your air
conditioning or heat pump system. Because damage can occur if the compressor is restarted too
soon after shutdown, this feature forces the compressor to wait 5 minutes before restarting. During
the wait time, the message Cool On or Heat On flashes on the screen. When the safe wait time
has elapsed, the message stops flashing and the compressor turns on.
Adaptive Intelligent Recovery (AIR)
Built-in compressor protection
400-626-001-C (69-1969EFS-03 prog TH2110D_TH2210D user manual) USA.book Page 13 Tuesday, September 8, 2009 10:05 AM
To Next Page
Loading...
Need help?
General
