Honeywell TH9320WF - User Manual

Doc ID - 1188 • Rev 04 1 / 8
Honeywell WiFi Thermostat
Integration Release Notes
Content
Introduction...1
Installing the Honeywell thermostat...2
Registering the thermostat...3
Enabling auto mode...3
Configuring in Fusion...4
Configuring rules with TCC thermostats...6
Contact information...8
Last modified: 05/03/18
Introduction
The Honeywell WiFi thermostats are a series of WiFi thermostats that have been
tested and certified for integration with the ClareHome system.
When integrating a Honeywell WiFi thermostat into your ClareHome project, no
extra connections are necessary. Install the thermostat according to the
Honeywell documentation, register the thermostat on the Honeywell portal,
enable auto mode in the thermostat, and then connect it to the network using IP.
All HVAC integrations share a common UI, so that the user experience is
consistent. Temperature settings can be controlled via events. Use Fusion’s
Scenes and Rules to automate the actions your customers want.
Supported models:
TH9320WF
TH8320WF
TH8321WF
RTH-8580WF
RTH9580WF
RTH6580WF
TH6320WF1005/B

Honeywell TH9320WF Specifications

General

Model	TH9320WF
Display	Color Touchscreen
Wi-Fi Connectivity	Yes
Programmable	Yes
Energy Saving	Yes
Programming	Customizable Schedules
Humidity Control	Yes
Weight	0.5 lbs
Smart Home Compatibility	Amazon Alexa, Google Assistant
Remote Access	Yes, via mobile app
Programmability	7-day
Power Source	Hardwired
Stages	Up to 3 Heat/2 Cool
Remote Control	Yes, via mobile app
Energy Saving Features	Smart Response Technology
Alerts	Temperature, Humidity
Battery Type	None, hardwired

Summary

Introduction to Honeywell WiFi Thermostat Integration

Installing the Honeywell Thermostat

Registering the Honeywell Thermostat

Enabling Auto Mode for Honeywell Thermostats

Configuring Honeywell Thermostats in Fusion

Configuring Rules with TCC Thermostats

Contact Information for Clare Controls