To Next PageTo Next Page
Need help?Do you have a question about the Honeywell PRO TH2000DH Series and is the answer not in the manual?
General| Stages | 1 Heat/1 Cool |
|---|---|
| Compatibility | Single Stage Systems |
| Power Source | 24 VAC |
| Voltage | 24VAC |
| Dimensions | 1.13 in. deep |
| Temperature Range | 40°F to 90°F (4°C to 32°C) |
Lists the specific Honeywell thermostat models covered in the manual.
Details the system compatibility for each thermostat model type.
Emphasizes that installation must be performed by a trained and experienced technician.
Provides contact information for customer support and assistance.
Instructions on how to detach the thermostat unit from its wallplate.
Steps for positioning, drilling, and securing the wallplate to the wall.
Specifies drill bit sizes for drywall and plaster installation.
Alerts users to the risk of electrical shock during installation.
Provides guidance on the proper disposal of thermostats containing mercury.
Details options for primary/backup power, AC power, and battery usage.
Explains the function of each terminal on these thermostat models.
Explains the function of each terminal on these thermostat models.
Explains the function of each terminal on the TH1100DH model.
Shows wiring connections for 2H/1C heat pump systems.
Shows wiring connections for 1H/1C heat pump systems.
Wiring guide for 1H/1C conventional systems with one transformer.
Wiring guide for 1H/1C conventional systems with two transformers.
Wiring guide for heat-only systems.
Provides essential notes on wire types, jumper settings, and common connections.
Explains how to set the fan operation switch for different heating systems.
Instructions for snapping the thermostat unit onto the installed wallplate.
Guidance on pushing excess wires and sealing the wall opening.
Procedure to start the thermostat's configuration menu.
Instructions on changing settings and advancing through configuration options.
How to exit the setup menu and save applied changes.
Settings for heating cycles per hour for various system types.
Settings for auxiliary heat cycles per hour for heat pump systems.
Settings for compressor cycles per hour for compatible systems.
Configuration for the Early Start feature to reach setpoint by scheduled time.
Options for temperature units (F/C) and clock display format (12/24 hour).
Settings for compressor off time and programmable temperature ranges.
Option to reset the program schedule to factory default settings.
Details how Early Start allows temperature to be reached at the scheduled time.
Explains how Compressor Protection prevents premature compressor restarts.
Information on ordering replacement parts, such as cover plate assembly.
Lists operating temperature ranges, ambient, shipping, humidity, and physical dimensions.
Details voltage and running current for different system stages (heat, auxiliary, cool).
