Honeywell PRO TH2000DH Series - Installer Setup and Configuration; Initiating Setup Mode; Navigating Setup Functions; Saving and Exiting Setup

Installation Guide
6
69-2609EFS—03
ENGLISH
5
5
M32819
Followtheprocedurebelowtoconfigurethethermostattomatchthe
installedheating/coolingsystem,andcustomizefeatureoperationasdesired.
Function
number
Setting
Tobegin,press and hold the s and tbuttonsuntilthedisplaychanges.
Press the s or tbuttontochangethesetting.
Press the s and tbuttonssimultaneouslyforonesecondto
advancetothenextfunction.
Press and hold the s and tbuttonstoexitandsavesettings.
Installer setup
M32713
Heat Off Cool Auto On
Fan
M32758
Heat Off Cool Auto On
Fan
NOTE:Ifyoudonotpressanybuttonfor60secondswhileyouarein
thesetupmenu,thethermostatautomaticallysavesanychangesmade
andexitsthemenu.