Honeywell TH6100AF2004 User Manual

Package Includes:
• T6 Pro Hydronic Programmable
Thermostat
• Floor sensor (model AC11201)
• UWP™ Mounting System
• Standard Installation Adapter
(J-box adapter)
• Decorative Cover Plate – Small; size
449/64 in x 449/64 in x 11/32 in
(121 mm x 121 mm x 9 mm)
• Screws and anchors
• 2 AA Batteries
• Installation Instructions and User Guide
T6 Pro Hydronic
Programmable Thermostat
TH6100AF2004
Installation Instructions
ProSeries
Welcome!
T6 Pro Hydronic Programmable Thermostat can be used
to control the ambient air temperature or floor temperature
or both. You can choose among the following temperature
control modes.
A mode: Controls and displays the ambient air temperature
only.
F mode: Controls and displays the floor temperature only
using an external floor temperature sensor. This control
mode is suitable for areas such as bathrooms where floor
temperature could be scheduled to be warm only during
occupied, morning and evening periods.
• Floor temperature is indicated by “FLR” above the actual
floor temperature.
• Actual ambient air temperature could also be displayed in
the Thermostat MENU/TEMP.
AF mode: Controls and displays the ambient air temperature
as well as maintains the floor temperature within desired
floor temperature limits using an external floor temperature
sensor. Setting the minimum and maximum floor
temperature limits is a way to enhance
comfort and to protect the floor covering at
the same time.
• Actual floor temperature could also be
displayed in the Thermostat MENU/
TEMP.
NOTE: To set the thermostat temperature
control mode, go to “Installer setup (ISU)”
on page 7.
A, AF mode; main screen
F mode; main screen
Temperatures menu
Back

Honeywell TH6100AF2004 Specifications

General

Brand	Honeywell
Model	TH6100AF2004
Category	Thermostat
Language	English

Summary

Installation Instructions

Welcome

Introduces the T6 Pro Hydronic thermostat and its temperature control modes.

Optional Cover Plate Installation

Instructions for installing an optional cover plate onto the UWP mounting system.

UWP Mounting System Installation

Steps for mounting the UWP (Universal Wall Plate) to the wall securely.

Power Options

Setting Slider Tabs

Guidance on setting R/Rc slider tabs for different power configurations.

Wiring Terminal Designations

Wiring Conventional Systems

Explains wiring configurations for various conventional heating systems.

Floor Temperature Sensor Installation

Recommended Floor Temperatures Settings

Provides recommended maximum floor temperatures for different floor types and freeze protection.

Thermostat Mounting

Setting the Time and Date

Steps to set the current time and date on the thermostat display.

System Operation Settings

How to cycle through and select available system modes (Heat, Off).

Installer Setup (ISU)

Advanced Setup Options (ISU)

Details ISU parameters like scheduling, temperature scale, sensor configuration, and control modes.

Installer System Test

Alerts

Explains how active alerts are displayed and provides a list of alert/reminder definitions.

Specifications

Customer Assistance