Honeywell TH6220WF2 - Wi-Fi Settings Management; Accessing Wi-Fi Settings; Enabling;Disabling Wi-Fi

21
To access the WiFi settings option, follow the
steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see WIFI,
then touch Select.
3 Touch the or arrows to cycle through
the following options SETUP WIFI, WAC
SETTING and WIFI ON/OFF, and touch Select
on the option you want to edit.
Choose the SETUP WIFI option to get your
thermostat connected to your home’s WiFi
network (see instructions on page 10 for
more). For WAC SETTING and WIFI ON/OFF
information, see below.
WiFi settings
The Wireless Accessory Configuration (WAC) setting is an iOS-specific setting
that enables WiFi credentials to be securely transferred from an iOS device to the
thermostat. The WAC setting is enabled by default to simplify the WiFi connection
process. If you choose to disable it (not recommended), you’ll have to use a different
process to get your thermostat connected to WiFi.
WAC setting
If you want to disconnect your thermostat from
WiFi, follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see WIFI,
then touch Select.
3 Touch the or arrows until you see WIFI
ON/OFF, then touch Select.
4 Touch the or arrows to choose WIFI ON
or WIFI OFF. Then touch Done to confirm.
Turning thermostat WiFi on and off
Back Select
Done Cancel
Back Select
Back Select