To Next PageTo Next Page
Need help?Do you have a question about the Honeywell THX321WF2001W and is the answer not in the manual?
General| Type | Smart Thermostat |
|---|---|
| Wi-Fi Connectivity | Yes |
| Compatibility | Works with most HVAC systems |
| Display | Color touchscreen |
| Battery Backup | Yes |
| Humidity Control | Yes |
| Programmability | 7-day programmable |
| Power Source | Hardwired with battery backup |
| Control | App |
| Energy Saving Features | Geofencing |
| Temperature Range | 40°F to 90°F |
Explore location-based, smart, time-based, and manual scheduling options for home comfort.
Provides intelligent alerts, automatic mode switching, and adaptive recovery for optimal performance.
Choose between Heat, Off, Cool, Auto, or Em Heat modes for system operation.
Control the heating (Heat) or cooling (Cool) systems independently.
Automatically switches between heating and cooling to maintain the desired temperature.
Activates auxiliary or emergency heat, primarily for heat pump systems.
Thermostat automatically switches between heat and cool based on temperature differentials.
Uses backup heat by locking out the heat pump in Em Heat mode.
Manually set the date and time if Wi-Fi connectivity is unavailable.
Steps to select a Wi-Fi network and enter credentials for connection.
Instructions to turn the thermostat's Wi-Fi functionality on or off.
Integrate the thermostat with Apple HomeKit using the app and accessory code.
Initiate the process to create a custom time-based schedule directly on the thermostat.
Utilize location-based, time-based, or combined scheduling for optimal comfort.
Automate temperature adjustments using geofencing based on smartphone location.
Program detailed daily schedules with adjustable periods via the Honeywell Home app.
Modify the geofence radius using an interactive map interface within the app.
Press up/down arrows to change the setpoint, overriding the current schedule temporarily.
Choose to hold the temperature until the next period, a specific time, or permanently.
Select Unlocked, Partially Locked, or Fully Locked modes to restrict access.
Set a password for enhanced security and to prevent unauthorized changes to settings.
Prevent window frost/condensation by limiting humidifier output based on outdoor conditions.
Learns system operation to reach programmed temperature settings precisely on time.
Prevents equipment damage by pausing compressor restarts for a short duration.
Utilizes P+I control for precise temperature management and reduced system offset.
Access the menu to view active alerts and notifications indicated by a red dot.
Alerts for disconnected indoor/outdoor sensors and unresponsive Redlink RF toolkit.
Covers firmware updates, security practices, and protecting against unauthorized access.
Solutions for when the heating or cooling system does not respond to commands.
