EasyManua.ls Logo

Honeywell TrueDRY DR90 User Manual

Honeywell TrueDRY DR90
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TrueDRY DR90
Ventilating Dehumidification System
SPECIFICATION DATA
68-3087-04
DR90 Capacities and Performance
Part Number: DR90A2000
Blower: 262 CFM @ 0.0 in. WG
106 CFM @ 0.6 in. WG
Supply Voltage: 120 VAC; 60 Hz.
Amps: 5.9 A
Power transformer
to R/C terminals: 24 VAC, 0.85A
Energy 2.9 liters (6.1 pints) per
performance: kilowatt hour (KWH) Energy
Refrigerant: R-410A
Operating Temp Range
(outside cabinet): 34 – 135 ºF (1.1 – 57.2 ºC)
Capacity:
54 pints/day (60 ºF [15.6 ºC], 60 %RH)
73 pints/day (70 ºF [21.1 ºC], 60 %RH)
90 pints/day (80 ºF [26.7 ºC], 60 %RH)
Coverage: Up to 2800 sq. ft.
Duct Connections: 6 in. Supply Inlet
10 in. Round Inlet
10 in. Round Outlet
(ABS Plastic)
Filter Efficiency: Standard MERV-11
Drain Connection: 3/4 in. threaded female NPT,
with attached 3/4 in. threaded
male NPT
Dimensions (See Fig. 1):
Width: 14-3/8 in.
Height: 19-3/8 in.
Length: 25-13/16 in. (without collars)
32-3/16 in. (with collars)
Weight: 82 lbs (37.2 Kg)
Shipping Specs
Width: 18-1/2 in.
Height: 21-1/2 in.
Length: 40 in.
Weight: 93 lbs (42.2 Kg)
Optional Parts
Replacement Filter 50070171-002
Motorized Ventilation Damper EARD6
Bypass Damper CPRD10
Compressor Relay, 24 VAC, 30 A 50035445-014
Compressor Run Capacitor 50070171-001
10” Duct Collar 50049536-005
Fan Assembly 50049537-006/
DR90XFAN1
Capacitor - Fan 50070204-001/
DR90XCFA1
Fan Relay, SPDT, 24 VAC, 15A 50035445-011
Transformer 120/24 VAC, 40 VA 50035445-013
Defrost Thermostat 50070204-002
ETL Listed. Energy Star Rated. Conforms to UL
standard 60335-2-40.
For more information call 1-800-468-1502 or visit
our website at customer.honeywell.com.
Honeywell TrueDRY Whole-House Dehumidifiers are designed to help
maintain proper humidity levels in the home. Lower humidity levels feel more
comfortable, and helps safeguard against problems from excess moisture
in the home such as mold, mildew, warped wood, peeling of paint, or musty
odors. Honeywell TrueDRY Whole Home Dehumidification Systems are
Energy Star rated providing efficient and economical operation.
Dehumidification
The Honeywell TrueDRY DR90 dehumidifier utilizes refrigeration and
internal air circulation to cool the incoming air stream below its dew point.
Water condenses and drains off the coil, sending drier air back into the
house.
Can remove up to 90 pints/day of moisture.
Energy Star rated
Electrocoating reduces coil corrosion and helps prevent refrigerant
leaks
Top or side ducted exhaust
Reduced noise during operation
MERV 11 air filtration
Ventilation
The Honeywell TrueDRY DR90 has a separate control for ventilation, so the
powerful onboard blower can be used to efficiently bring fresh air into the
house even when dehumidification is not needed. The TrueDRY DR90 has
a 6” supply side damper that can be used to duct in air from the outside, or
closed if not needed.
Simplified Wiring
The Honeywell TrueDRY DR90 dehumidifiers can be controlled by a variety
of 24-volt remote wired and wireless controls.
The TrueDRY DR90 allows the use of a 24V normally closed float switch
or water sensor to simplify installation in a drain pan. This will allow the
external float switch to kill power to the compressor in the event of water
blockage.
Fig. 1. Dimensions in in. (mm).
3-3/16
(81)
3-3/16
(81)
19-3/8
(492)
14-3/8
(365)
25-13/16
(656)
M28840
A

Other manuals for Honeywell TrueDRY DR90

Question and Answer IconNeed help?

Do you have a question about the Honeywell TrueDRY DR90 and is the answer not in the manual?

Honeywell TrueDRY DR90 Specifications

General IconGeneral
ModelTrueDRY DR90
Dehumidification Capacity90 pints per day
Energy Factor2.5 L/kWh
Weight42 lbs
Operating Temperature Range34-135 °F
Filter TypeMERV 11
Voltage115V
Frequency60 Hz
Water Removal (at AHAM conditions)90 pints per day
Drainage TypeGravity drain or manual drain

Summary

TrueDRY DR90 Specifications

DR90 Capacities and Performance

Details on moisture removal capacity, energy performance, and operating ranges.

Dimensions

Physical dimensions of the unit for installation planning.

Shipping Specs

Dimensions and weight for shipping the unit.

Optional Parts

List of available optional parts for the DR90 unit.

Installation Recommendations and Options

Dedicated Return to Main Supply

Describes an installation method connecting the unit to a dedicated return.

Main Return to Main Supply

Details an installation configuration connecting the unit to the main supply.

Main Return to Main Return

Explains an installation setup for a main return to main return configuration.

Dedicated Return to Dedicated Supply

Outlines an installation where the unit connects to a dedicated supply.

Related product manuals