Copyright © 2010 Honeywell GmbH • Subject to change without notice EN0H-1950GE23 R0410
T
pes
Description Sensor Type Temperature Range
TS - NFN
NTC 10K Fast -50 °C … 110 °C
TS - NFR
NTC 10K Fast -50 °C … 110 °C
TS - RFH
PT1000 -50 °C … 110 °C
Application
Temperature Sensor Type TS is used in refrigeration circuits to measure
the refrigerant’s temperature.
The Temperature Sensor TS can be used according to its measuring
range
in the liquid line, in the injection line, in the hot gas line and in the suction
line of refrigeration circuits. Due to fast temperature capture in refrigeration
circuits the signal can be communicated very fast.
Materials
Body
Stainless Steel, AISI 304
Cable
Thermical rubber poly.
Electrical Connection
Pins
Other appplications on request.
Special Characteristics
Apply Temperature Sensors for usage in regrigeration and HVAC
applications
For installation in liquid line, injection line, hot gas line and suc-
tion line
For usage of refrigerants R22, R134a, R404A, R407C, R410A, R502,
R507; not for Ammonia
Condensation-tight body IP67
Type TS – NFN & TS – NFR: NTC 10K
Type TS – RFH: PT1000
Technical Data
Resistance Value:
TS – NFN; TS – NFR
TS – RFH
10 kΩ at 25 °C
1 kΩ at 0 °C
Accuracy:
TS – NFN
TS – NFR
TS – RFH
1 % Full scale
± 0,2 °C
Class A
Response Time:
K = 5 sec in liquid V = 2 m/s
Sensitivity:
TS – NFN; TS – NFR
TS – RFH
NTC 10K fast
PT1000
Measuring Range:
-50 °C … +110 °C
Storage Temperature
-25 °C … 80 °C
Ambient Temperature
-25 °C … 80 °C
Electrical Connection
2-wire
Dimension
Ø 4 mm; l = 40 mm
Connecting Cable
3 m
Insulation Voltage
250 VAC
Electr. Protection degree:
IP67
Temperature Sensor T
pe
TS
TEMPERATURE SENSOR
FOR REFRIGERATION AND HVAC APPLICATIONS
PRODUCT-DATA
To Next Page
Need help?
General
