Honeywell VISTA-20P User Manual

– 23 –
Bypassing Protection Zones (cont’d)
Quick Bypass
If programmed, "Quick Bypass" allows you to easily bypass all open (faulted) zones
without having to enter zone numbers individually. This feature is useful if, for
example, you routinely leave certain windows open when arming at night.
1. + 6 BYPASS + [#]
(Security Code)
In a few moments, all open zones will be displayed
and automatically bypassed.
Make sure that only
those zones that you wish to leave unprotected are
bypassed, and that there are no other zones
unintentionally left open.
Alpha Display:
DISARMED
HIT ∗ FOR FAULTS
Fixed-Word Display: NOT
READY
2. Wait for all bypassed zones to be displayed, then arm
the system as desired.
Ask your installer if "Quick Bypass" is active for your
system, and if so, check here:
Alpha Display:
DISARMED BYPASS
READY TO ARM
Fixed-Word Display: BYPASS
National Security Systems (800) 457-1999

Honeywell VISTA-20P Specifications

General

Partitions	2
Power Supply	16.5VAC, 25VA transformer
Zones	Up to 48
Hardwired Zones	9
Wireless Zones	Up to 39 (with wireless receiver)
User Codes	48
Keypads	Up to 8
Backup Battery	12V, 4AH or 7AH rechargeable battery
Outputs	4
Wireless Expansion	Supports 5800 series wireless receivers
Communication	POTS line, optional GSM or IP communicator