Camera
Basic Camera Functions
Use the Basic Camera Features
Understand your camera's basic features to help you take better pictures.
Basic photo mode: Open Camera. In the viewnder, touch to take a photo. You can also
set the volume down button as a shutter button for your camera.
Adjust your camera's exposure: Your camera will adjust its exposure automatically depending on
the ambient light level. Increasing the exposure will make pictures appear brighter whereas decreasing
the exposure will make pictures appear darker. You can adjust the exposure manually from the
viewnder by touching the screen and dragging the icon up or down.
Enable or disable ash: Flash is used to provide extra lighting for taking photos in low light
conditions. From the viewnder, touch to select one of the following ash modes:
l Auto: The camera automatically enables or disables ash depending on the ambient light level.
l Off: Disable ash.
l On: Enable ash.
l Always on: Flash is always on while you are in the viewnder.
Use Camera to Record Videos
Go to Camera > Video, then touch to record a video.
Take a picture while recording: Touch to take a picture while recording.
Zoom in or out: Touch and hold the viewnder screen with two ngers, then spread your ngers to
zoom in or pinch them to zoom out. When zooming, a zoom bar will appear. You can slide it to zoom
your camera in or out.
Keep the ash on while lming: When recording a video in dim light, touch , and select
to keep the ash on.
Shoot an AI video: Touch , and select effects such as AI color or Background blur to lm an AI
video.
l During recording, you can touch to take a photo with AI lming effects.
l You can also go to > Resolution to change the aspect ratio to 21:9 to produce cinematic
effects.
23
To Next Page
Loading...
