Share Your Network via USB
1 Use a USB cable to connect your phone to your computer.
2 On your phone, go to Settings > Mobile network > Personal hotspot > More, and
enable USB tethering to share your mobile data or the currently connected Wi-Fi
network.
Enable or Disable Airplane Mode
When taking a plane, you can turn on the Airplane mode according to the requirements of
the airline. In the Airplane mode, calling, messaging, or using mobile data on your phone
will be banned, but other functions can work normally.
You can enable or disable Airplane mode using any of the following methods:
• Swipe down from the top right of the screen to open the Control Center. Tap
to
enable or disable Airplane mode.
• Go to Settings > Mobile network and toggle on or Airplane mode.
After you turn on the Airplane mode for the time, Wi-Fi and Bluetooth on your phone
will be turned automatically.
If allowed by the airline, you can manually turn on or Wi-Fi and Bluetooth on your
phone, and your phone will keep this setting when you enabled Airplane mode next time.
Manage Data Usage
Open System Manager , then touch Data usage to view data usage and manage network
access.
More Connections
Introduction to NFC
Near Field Communication (NFC) is a wireless communications technology
that allows mobile and other electronic devices to connect in countless ways, allowing you
to transfer data and make mobile payments easily.
• Not all devices NFC.
• Enable Read and write/P2P on the NFC settings screen if available. feature may
depending on your carrier.
Enable or Disable NFC
You can enable or disable NFC as follows:
• Swipe down from the top right of the screen to open the Control Center, then enable or
disable NFC. You can touch and hold NFC to access the settings screen.
• Go to Settings > More connections > NFC, then enable or disable NFC.
Settings
79
83 / 112 82 / 110 83 / 112
To Next Page
Loading...
