honor Magic6 Lite 5G - Biometrics & Password

Show Notication Icons in the Status Bar
Go to Settings > Notications > More notication settings, and enable Show notication
icons in the status bar.
Biometrics & Password
Use ngerprint ID
You can use your  ID to unlock the screen, automatically enter account numbers
and passwords, or access private information such as the App Lock.
Enroll a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID and follow the instructions to
set or enter the lock screen password.
2
Touch New ngerprint to begin enrolling your 
3
Place your  on the  sensor. When you feel a vibration, lift your 
then press again. Move your  around to enroll   of it.
4
When the enrollment has been completed, touch OK.
You can now place your  on the  sensor to unlock the screen.
Add in-screen ngerprint ID
1
Go to Settings > Biometrics & password > Fingerprint ID. Follow the on-screen
prompts to set or enter the lock screen password.
2
Tap New ngerprint > ADD FINGERPRINT. Enroll your 
3
Place your  on the in-screen  sensing area. Press on the area until the
phone vibrates and release. Repeat this operation with  sections of the same
 until the enrollment is complete.
4  tap OK.
Once the screen is locked, pick up your phone. An in-screen  sensing area will
appear on the screen. Touch the area with the  used for the enrollment to unlock the
screen.
Rename or Delete a Fingerprint
1 Go to Settings > Biometrics & password > Fingerprint ID and enter your lock screen
password.
2 In the Fingerprint list section, touch an enrolled  to rename or delete it.
Identify a Fingerprint
Fingerprint  allows you to match your  with the enrolled 
Settings
92
96 / 112 95 / 110 96 / 112