honor Magic6 Pro 5G - Connect to Mobile Network

• Light up the screen, swipe up from the bottom edge of the screen to open the quick
operation panel, tap an icon to launch the app.  include Flashlight, Calculator, Timer,
etc.
Connect to the Mobile Network
Connect to Mobile Data
1 Make sure that mobile data is available on your SIM card.
2 Connect to mobile data using either of the following methods:
• Swipe down from the top right of the screen to open the Control Center. Turn on
Mobile data.
• Go to Settings > Mobile network > Mobile data, and enable Mobile data.
To save  power and mobile data, disable the mobile data  when you don't
need it.
Enable 5G
• 5G  are only available in some countries and regions.
• Not all devices  5G.
Fifth generation mobile networks,  generation wireless systems, or 
(5G) is the  generation mobile communication technology. Compared to 4G, 5G 
higher data transfer rates and  latency.
When two SIM cards are   dual card 5G by default.
1
Please  if your card  5G based on the carrier network and related
 deployment, and contact your network carrier to enable 5G.
2 If two SIM cards are  to your phone, go to Settings > Mobile network > SIM
management and set SIM 1 or SIM 2 as the default card for data.
5G features may not be available in some network environments and geographic locations
due to carrier network band 
Manage SIM Cards
You can enable or disable SIM cards and name them for easier 
Enable or Disable a SIM Card
Go to Settings > Mobile network > SIM management, and enable or disable a SIM as
needed.
Once disabled, a SIM card cannot be used for calling, messaging, or accessing the Internet.
Get Familiar
7