Enable VoLTE
Contact your carrier to activate the VoLTE for your SIM card. If both the and
SIM card trays of a dual-SIM phone VoLTE, it can be enabled for both
SIM cards.
• feature may depending on your carrier.
• 5G are only available in some countries and regions.
• Enable 5G if the 5G network is VoLTE feature will then be enabled by default.
Make a Video Call
Video calls are only possible when both are using VoLTE-activated devices.
1 Open Phone, touch the Contacts tab at the bottom of the screen, then select the
contact you want to call.
2 Touch
to make a video call.
During a voice call, you can touch to switch to a video call.
More Connections
Introduction to NFC
Near Field Communication (NFC) is a wireless communications technology
that allows mobile and other electronic devices to connect in countless ways, allowing you
to transfer data and make mobile payments easily.
• Not all devices NFC.
• Enable Read and write/P2P on the NFC settings screen if available. feature may
depending on your carrier.
Enable or Disable NFC
You can enable or disable NFC as follows:
• Swipe down from the top right of the screen to open the Control Center, then enable or
disable NFC. You can touch and hold NFC to access the settings screen.
• Go to Settings > More connections > NFC, then enable or disable NFC.
Project Your Phone Screen Wirelessly
For security reasons, after projecting your phone screen wirelessly to a large display (such
as a TV) for work or such as incoming call SMS
messages, and clock alarms will only be displayed on your phone.
1 the following based on the model and functions of the large display:
Settings
112
To Next Page
Loading...
