• Set Device name.
• Set Password.
• Touch Connected devices to view the connected devices list and blocklist. Touch a
device in the Connected devices list to move it to the Blocklist list as prompted. You can
also remove a device from the list.
• If you are sharing a mobile data network, you can also touch More to set Data limit and
AP band.
Share Your Network via Bluetooth
1 Go to Settings > Bluetooth, and enable Bluetooth. Select a device, then follow the
onscreen instructions to complete pairing.
2 Go to Settings > Mobile network > Personal hotspot > More, and enable Bluetooth
tethering.
3 On the Bluetooth settings screen of the paired device, touch
next to the name of
your device, then enable Internet access to share your network.
Share Your Network via USB
1
Use a USB cable to connect your phone to your computer.
2
On your phone, go to Settings > Mobile network > Personal hotspot > More, and
enable USB tethering to share your mobile data or the currently connected Wi-Fi
network.
Enable or Disable Airplane Mode
When taking a plane, you can turn on the Airplane mode according to the requirements of
the airline. In the Airplane mode, calling, messaging, or using mobile data on your phone
will be banned, but other functions can work normally.
You can enable or disable Airplane mode using any of the following methods:
• Swipe down from the top right of the screen to open the Control Center. Tap to
enable or disable Airplane mode.
• Go to Settings > Mobile network and toggle on or Airplane mode.
After you turn on the Airplane mode for the time, Wi-Fi and Bluetooth on your phone
will be turned automatically.
If allowed by the airline, you can manually turn on or Wi-Fi and Bluetooth on your
phone.
Manage Data Usage
Open System Manager , then touch Data usage to view data usage and manage network
access.
Settings
53
To Next Page
Loading...
