be weakened to reduce power consumption. When the level is lower than or equal
to 10%, stricter power saving measures are taken to ensure the longest standby time. It is
recommended that you enable Power Saving mode when the level is lower than or
equal to 20%.
To do so, go to Settings > Batte (or System Manager > Batte), and enable Power
Saving mode . A icon will then be displayed in the status bar.
You can touch > Learn more to view details about power saving measures.
Enable Ultra Power Saving mode
After enabling Ultra Power Saving mode, the screen display would go into Dark mode.
would disable most features and apps that may consume power and limit the
of the phone, with only basic features like Call and Messages retained to
extend the standby time. You may also add frequently used apps for emergency
operations.
out the following methods to enable Ultra Power Saving mode:
• Go to Settings > Batte (or go to System Manager > Batte), and enable Ultra Power
Saving mode.
• When the remaining is lower than 10%, tap TURN ON ULTRA POWER SAVING
MODE on the banner on the top of the screen.
In Ultra Power Saving mode, tap Exit on the upper right corner to exit Ultra Power Saving
mode.
Enable Peormance Mode
Peormance mode adjusts the power settings of your phone to deliver maximum
will cause the to drain more quickly, especially when graphic-
intensive apps are used.
When the has power, go to Settings > Batte (or System Manager >
Batte) and enable Peormance mode.
A icon will then be displayed in the status bar.
Peormance mode is available on selected devices only. If the Peormance mode option is
not displayed in Batte , it indicates that your device does not the feature.
Enable Sma Charge
Charge learns from your charging habits and manages the charging process
intelligently. feature reduces the wear level and prolongs the life by
reducing the time your device spends fully charged. It is advised that you keep this feature
enabled.
Settings
68
To Next Page
Loading...
