Enable accessibility features by shocut
You can enable an accessibility feature of your choice by the Volume key
1 Go to Settings > Accessibility features > Accessibility > Accessibility shocut.
2 Tap Select feature, choose the feature to be enabled by
3 Enable Accessibility shocut. Touch and hold the volume up and down keys at the
same time for 3 seconds to enable the accessibility feature.
Adjust Touch Response Time
feature allows you to adjust the screen response time when you touch and long press
on the screen.
Go to Settings > Accessibility features > Accessibility > Touch, and adjust Tap duration
and Long press duration as needed.
TalkBack
TalkBack allows your phone to automatically read out what you touch, select, and open.
Operating your phone is still possible when you can’t see the screen clearly.
TalkBack
Go to Settings > Accessibility features > Accessibility > TalkBack, enable TalkBack, and
tap OK.
Adjust Speech Rate
Go to Settings > Accessibility features > Accessibility > Text-to-speech, and drag the
slider of Speech rate. If ScreenReader has been enabled, you need to drag the slider with
two
TalkBack Operations
1 When enabled, you can operate your phone in the following ways:
• Scroll the screen: Swipe two up and down to scroll the screen. Swipe left and
right to turn the page or switch between screens.
• Single tap to select: Tap an item with a to select it (without opening). Your
phone will read out the selected item.
• Double tap to open: Once selected, double tap anywhere on the screen with a
to open the selected item. For example, to open Settings, you need to tap the icon
of Settings with a then double tap anywhere on the screen.
Add ScreenReader Watermark
Go to Settings > Accessibility features > Accessibility > TalkBack, and enable Show
TalkBack watermark.
Settings
73