Hooker Furniture 5070-10563 User Manual

1
/
2
DISASSEMBLY INSTRUCTION
Item#: 5070-10563 EXECUTIVE DESK
Caution: Please read all instructions carefully before starting the removal process.
This unit is heavy and can best be assembled with the help of two or more persons.
For easier delivery, the desk can be taken apart as shown below.
Step 1: Take out all three top drawers and second drawers on both sides, loosen all screws (L) on
L-shaped metal plates and screws (M) under the front edge of top panel, and remove top
panel from desk. (see Diagram 1)
Diagram 1
Step 2. Loosen two bolts (I), lock washers (J), flat washers (K) at wood cleats under left bottom panel
through the holes by using allen wrench (H), and then repeat the steps at right side. (See
diagram 2, arrow indicated)

Hooker Furniture 5070-10563 Specifications

General

Brand	Hooker Furniture
Model	5070-10563
Category	Indoor Furnishing
Language	English

Summary

Executive Desk Disassembly Procedure

Step 1: Remove Top Panel

Loosen screws (L) on metal plates and screws (M) under the front edge of the top panel.

Step 2: Loosen Bottom Panel Bolts

Use allen wrench (H) to loosen bolts (I), lock washers (J), and flat washers (K) at wood cleats.

Step 3: Detach Top Section

Loosen remaining bolts (I), washers (J, K) at wood cleats and take off the top section (C).

Step 4: Remove Back Panel

Loosen four bolts (I), washers (J, K) attached to the back panel (D) and pull it upright.