Hooker Furniture Seven Seas Style EC216 User Manual

Seven Seas Style:EC216 Operational Instructions
Carefully unpack all parts and identify them with parts list and
assemble the chair following the Assembly Instructions.
Put the chair onto a flat floor then you can sit onto and adjust the
reclining and the seat height..
1. Please sit down onto the chair and use the left handle (A) to adjust the
reclining of the chair, and use the right handle (B) to adjust the height of it.
2. Turn the left handle (A) upward and the chair is active to recline .Get a
desired tilt and release the left handle to lock it. You can lock at several
different tilt angles by reclining your body.
3. Turn the right handle (B) upward to get an active cylinder for adjusting
the height of the chair. Raise your body up, the seat will be lifted up to a
desired height by the cylinder. To get a lower height, please sit down with
the right handle (B) turning upward. Release the right handle (B) to lock
the cylinder when get a desired seat height.
Parts As Shown
A. Left handle
B. Right handle
C. Mechanism
D. Base set
A
B
C
D

Hooker Furniture Seven Seas Style EC216 Specifications

General

Brand	Hooker Furniture
Model	Seven Seas Style EC216
Category	Indoor Furnishing
Language	English

Summary

Operational Instructions

Adjusting Chair Reclining

Use the left handle (A) to adjust the reclining. Turn upward to recline and release to lock at desired tilt angles.

Adjusting Seat Height

Use the right handle (B) to adjust height. Turn upward to activate cylinder for lifting or lowering the seat.

Parts Identification

Left Handle

Component labeled A, used for adjusting the chair's reclining function.

Right Handle

Component labeled B, used for adjusting the chair's seat height.

Mechanism

Component labeled C, representing the chair's internal adjustment mechanism.

Base Set

Component labeled D, referring to the chair's base and wheel assembly.