Hootoo HT-BS030 - Same Code Delay Time Setting; Reading Setting; Code Suffix; Prefix Setting

13 14
Same code delay time infinite
Same Code Delay Time Setting
Same code delay time 0 sec *
Same code delay time 1 sec
Same code delay time 2 sec
Set up the minimum delay time between decoding of the same codes:
Single Scan
Automatic Off
Automatic On
Scanner Reading Setting
Continuous Scan
Note: When you use the automatic mode, the sleep time is set to 15 minutes.
Disable
LF
CR+LF
CR
Code Suffix / Prefix Setting
Preamble - STX
Postamble - ETX
Add ID AS Prefix on
Add ID AS Prefix off *