Control panel and indicator lights
Programme Selector – select the required programme
On/Off button and indicator (Marche Arrêt) – press to switch on, the indicator
will light
Delay Start button (Départ Différé) – allows the user to delay the start of the
drying cycle (see details of Operation on page 14)
Start Pause button (Départ Pause) – press to commence the selected drying
programme
Acrylics/Synthetics button (Choix Textile) – press to reduce the heat level for
delicate items, the indicator above the button will light up. To change the heat
setting the programme must be reset
Low Heat – Indicator light ON
High Heat – Indicator light OFF
FILTER CARE Indicator (Entretien Filtre) – lights when the filter needs cleaning
COUNTDOWN display
START – When the dryer is switched On the START indicator will flash, when the
programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of
the programme
15' – Indicator lights when there is less than 15 minutes left until completion of
the programme. At this stage of the drying cycle the machine enters the Cool
down phase
STOP – Indicator lights when the programme is finished.
11
Controls and indicators
FILTER CARE INDICATOR
(Entretien Filtre)
START PAUSE
BUTTON
(Départ
Pause)
ON/OFF
BUTTON
(Marche
Arrêt)
ACRYLICS/SYNTHETICS
BUTTON
(Choix Textile)
PROGRAMME
SELECTOR
START DELAY
BUTTON
(Départ
Différé)
To Next Page
Loading...
Need help?
General