For best results, pretreat stains with a HOOVER® spot treatment (see HOOVER® Cleaning Solution Guide) to help
loosen and remove even the most stubborn stains. Distribute a generous amount of pretreat spray on spot, stain, or
high traffic area.
Always follow specific directions found on solution label.
Wait 5-10 minutes before using machine.
STORAGE: Wrap cord around the cord hooks for convenient storage. Attach the plug end to the cord. For fast cord
release, simply turn the cord wraps 180 degrees to the right or left.
LUBRICATION: The motor is equipped with bearings which contain sufficient lubrication for their lifetime. The addi-
tion of lubricant could cause damage. Do not add lubricant to motor bearings.
Tools and formula may vary by model.
MAINTENANCE
WARNING: To reduce the risk of personal injury – Unplug before cleaning or servicing.
WARNING: To reduce risk of fire and electric shock due to internal component damage, use only HOOVER®
cleaning products intended for use with the appliance as noted.
This product contains no serviceable parts. If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, call customer service at 1.800.944.9200 prior to continuing use.
HOW TO CLEAN THE RECOVERY TANK
1. Press TANK RELEASE button then lift lid off for emptying and rinsing. Clean water will help remove dirt &
debris from the tank. Let air dry before reinstalling.
To Next Page
Loading...
Need help?
General
