CLEANING HARD FLOORS* STORAGE
Use the cleaner as described in ‘Cleaning
Carpets’.
After use remove the cloth from the adapter plate
and wash the cloth pad in a washing machine with
a mild detergent at maximum temperature 30°c.
Do not use a fabric softener.
Before storing the cleaner:
Turn the cleaner off and disconnect from the
electrical socket.
Empty and rinse the dirty water tank. Allow to air dry.
Press the handle release button and lower the
handle for storage.
Do not store the cleaner on a wood surface unless
the cleaner is completely dry.
Attach the Velcro side of the cloth to the
underside of the cloth adaptor plate.
Attached the cloth adapter plate to the
foot of the cleaner.
- 7 -
1
2
3
!
WARNING: Use only Hoover carpet
cleaning solution.
Using other solutions may affect
your warranty.
!
* Certain models only
CORD STORAGE
CORD CLIP
Turn the cleaner off and remove the plug from the
electrical socket. Wind the cord around the cord
storage hooks.
Rotate the storage hooks to quickly release the full
length of the power cord.
Do not run over the supply cord.
Clip the supply cord in the cord clip at the back of the
handle to avoid accidentally running the cleaner over
the cord and causing any damage
Prior to storing the machine, empty out any
remaining formula from the formula tank and
rinse out the machine by running a tank of fresh
water from the formula tank.
To Next Page
Loading...
Need help?
General
