3. Lift out lens.
4. Remove bulbs by pulling
straight out of sockets. Replace
by pushing each bulb straight into
the socket until it locks in place.
(Excessive force is not required).
5. Replace lens by inserting plastic
projections into openings in
cleaner.
6. Press firmly at center and sides
of lens to snap into place.
The belt
-/he belt drives the agitator and is
important for the efficient opera-
tion of your cleaner. Because of
this, when buying a new belt, you
should always insist on a genuine
HOOVER belt. Some other belts
on the market, not manufactured
under the Hoover design and
quality controls, may not operate
the agitator correctly and may
damage your cleaner.
When to replace belt
Check from time to time to be sure
the belt is in good condition. If it
is stretched, cut, or broken, it
should be replaced.
AGITATOR BELT
15
To Next Page
Loading...
