Hoover Cruise Series - Refitting the separator, filter and dirt container

11
MAINTENANCE
Cleaning the filter and separator
Refitting the separator, filter and dirt container
Tap the mesh filter and separator
over a bin to remove any dirt/
debris. Using a dry cloth wipe
away any remaining dirt/debris.
Line up the arrows around the side
of the separator with the arrows on
the handheld. Twist the separator
clockwise locking it into place.
Refit the mesh filter with the rim of
the filter at the top. Twist the filter
clockwise and lock into place.
Tilt the dirt container slightly forward
and line up onto the handheld.
When the dirt container is seated on
the handheld push the dirt container
backwards to lock into place.
CAUTION: Incorrect fitting of the separator and filter will reduce suction.