8
How to Use: Accessories
4
Turn off, unplug, and allow steamer to cool before using or removing
accessories. Always have the nozzle pointed away from you and others
during installation.
CAUTION
! !
ATTACHING ACCESSORIES
See the "Accessories Chart” on page 9 for suggested use and extensions required.
NOZZLE EXTENSION
How to Attach
Fit the Turbo Nozzle Extension over the Steam Nozzle on Handheld
Steamer (4.1). Align the orientation marks and rotate clockwise until Turbo
Nozzle Extension is in locked position and secure. Once Turbo Nozzle
Extension is attached, use for direct steam application or attach desired
accessories. See “Accessory Chart” on page 9 for which accessories can
be attached.
To remove Turbo Nozzle Extension rotate counter-clockwise and gently pull
away from steamer.
STEAM NOZZLE
The Steam Nozzle is permanently attached to Handheld steamer and
can be used for direct steam application or attach desired accessories. See
“Accessory Chart” on page 9 for which accessories can be attached.
HOSE
How to Attach and Remove
Fit the hose assembly with built in handle over the Steam Nozzle on Handheld
Steam Cleaner (4.2). Align the orientation marks and rotate clockwise until
hose assembly is in locked position and secure.
To remove assembly, slide release button at the base of Hose away from
steamer and rotate counter-clockwise and pull away Hose.
Attaching Accessories to Hose Assembly with Built-In Handle
Once hose assembly is attached, you can attach the wand or wedge
accessory to the hose handle (4.3, A). To connect accessories, pull back the
quick release ring on handle and insert the wand or wedge. Once wand or
wedge is attached, release the ring (4.3, B), attach the corresponding
Microfiber pad and secure with the bungee clip. See “Accessory Chart” on
page 9 for suggested use. See “Maintenance” section on page 10 for cleaning
instructions.
4.1
4.2
4.3
A
B
To Next Page
Loading...
Need help?
General
