Hoover FloorMate Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit User Manual (English)

Questions and Answers:

M
Michael DominguezJul 30, 2025
Why Hoover FloorMate Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit won’t run or has low suction?
- C
  Christy MyersJul 30, 2025
  If your Hoover Vacuum Cleaner won't run or has low suction, there are several things to check: * Ensure the cleaner is firmly plugged in. * Check the fuse or breaker. * Empty the recovery tank in case it's full and the automatic shut-off is engaged. * Verify that the filter and filter lid are properly positioned. * Confirm the tanks are locked in place. * Inspect the filter and clean it if it's dirty. * Ensure the nozzle is correctly replaced and locked. * When not using the hose, make sure the hose door is tightly closed.
M
Michaela HarrisAug 5, 2025
What to do if my Hoover FloorMate Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit won’t pick up dirty solution or pushes a line of dry debris?
- G
  Garrett PerezAug 5, 2025
  If your Hoover Vacuum Cleaner won’t pick up the dirty solution or is pushing a line of dry debris, try the following: * Ensure the Mode selector dial is set for WET PICKUP. * Make sure the recovery tank is properly installed. * Empty the recovery tank. * Verify that the filter and filter lid are correctly positioned. * Check that the Model selector dial is set for DRY VAC. * Tip the nozzle off the floor by pushing down on the handle to pick up debris that is too large to clear the squeegee.
L
Lacey PageAug 10, 2025
How to fix cleaning solution that won’t dispense in my Hoover Vacuum Cleaner?
- J
  jennifer74Aug 10, 2025
  If the cleaning solution won’t dispense from your Hoover Vacuum Cleaner, ensure the solution tank is locked in position and refill the solution tank if it is empty. Also, the pump may need to be primed when using a tool.
R
rgillAug 17, 2025
How to troubleshoot Hoover FloorMate Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit brushes that won’t rotate?
- S
  Stacey EvansAug 17, 2025
  If the brushes on your Hoover Vacuum Cleaner won’t rotate, try the following steps: * Check that the Mode selector dial is set to WASH. * Reset the circuit breaker. * Turn the cleaner OFF, unplug it, wait one minute, plug it back in, and turn it ON again. * If the brushes continue to stall and the breaker trips again, clean the brushes to remove debris.
R
Robert JacksonAug 22, 2025
Why is water puddling behind my Hoover FloorMate Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit?
- M
  Melody JohnsonAug 22, 2025
  If you notice water puddling behind your Hoover Vacuum Cleaner, try these solutions: * Use the recommended detergents to reduce excess foaming. * Ensure the solution tank is installed properly. * Empty the recovery tank.

Hoover FloorMate Floor Mate SpinScrub Hard Floor Cleaner with portable tool kit Specifications

General

Product Type	Hard Floor Cleaner
Model	FloorMate SpinScrub
Weight	13.8 lbs
Brushes	SpinScrub Brushes
Included Accessories	Portable tool kit
Cleaning Technology	SpinScrub Technology
Suitable For	Hard floors
Functions	Wash, Scrub, Dry
Power Source	Corded Electric
Surface Recommendation	Hard Floors
Cord Length	20 feet