Hoover HHT6300/2X User Manual


If there is gap between the wall and the cooker hood, you may install the L-shaped
bracket on the bottom of the hood by two screws (3 x 12mm).
The installation of the L-shaped bracket is optional.

WARNING:  For safety reason, pl ease use only the same
size of fi xing or m ounting screw which are
recommended in this instruction manual.
 Failure to install the screws or fixing device in
accordance with these instructions may result
in electrical hazards.
StartUsingYourCookerHood
Rockerswitch
Rockerswitch

1.Insertthepowerplugintothesocket.
2.Pushswitch①to,thelampwillbeon;pushswitch①to“0”,thelampwill
beoff.
3.Pushtheswitch②into“I、II”,themotorwillbeon“low、high”two
speeds,pushinto“0”,themotorwillbeoff.
8

Hoover HHT6300/2X Specifications

General

Brand	Hoover
Model	HHT6300/2X
Category	Ventilation Hood
Language	English