To Next PageTo Next PageHow to fix a Hoover Linx Signature BH50020 that does not turn on?
If your Hoover Vacuum Cleaner isn't turning on, it could be due to several reasons. First, ensure the battery is properly inserted. If it is, the battery might not be charged or could be too hot. Try charging the battery or letting it cool down for 30 minutes before reinserting it. If none of these steps work, there may be internal component damage.
Why does my Hoover Vacuum Cleaner turn off while in use?
Your Hoover Vacuum Cleaner might be turning off for several reasons: the battery may be fully discharged or too hot, the dirt cup could be full, the filter or baffle tube might be dirty, or the airpath may be clogged. In the first two cases, remove and charge the battery or let it cool. To fix the other problems, empty the dirt cup, clean the filter and baffle tube. For a clogged airpath, remove the nozzle, clear any debris, and reassemble.
What to do if the brushroll will not turn on my Hoover Vacuum Cleaner?
If the brushroll on your Hoover Vacuum Cleaner isn't turning, there might be an obstruction. Remove the nozzle and clear any debris. It's also possible that the motor protection device has tripped; if so, turn the product off and allow approximately 30 minutes for it to reset. Another potential cause is a broken belt; in that case, remove the nozzle cover and replace the belt.
General| Type | Stick |
|---|---|
| Model | BH50020 |
| Power Source | Battery |
| Cordless | Yes |
| Voltage | 18V |
| Runtime | 20 minutes |
| Weight | 7.3 lbs |
| Filtration | Washable Filter |
| Bagged/Bagless | Bagless |
| Brush Roll | Yes |
| Cord Length | Not applicable |
| Special Features | Edge Cleaning |
Essential safety advice and precautions for operating the appliance.
Critical warnings regarding fire, electric shock, injury, and chemical exposure risks.
Identifies the primary components located on the front of the vacuum.
Details parts related to the dirt collection and filtration system.
Identifies the primary components located on the back of the vacuum.
Step-by-step instructions for assembling, charging, and operating the vacuum.
Guidance on cleaning and maintaining the dirt cup and filter for optimal performance.
Procedures for servicing the baffle tube, belt, and brushroll.
Information on checking battery charge and proper disposal methods.
Details regarding the collection, recycling, and disposal of lithium-ion batteries.
Contact details and procedures for obtaining servicing from an authorized representative.
Guide to diagnose and resolve common problems with the vacuum cleaner.
Specifies the duration and scope of the product's limited two-year warranty.
Instructions on how to initiate a warranty claim for the product.
Lists items and conditions excluded from the product's warranty coverage.
