To lift the stain, suction up the dirt and cleaning solution by applying downward pressure on the front of the
cleaning tool and pulling towards you. Repeat as needed.
IMPORTANT: Empty Dirty Water Tank when you hear an audible change. Ensure the tank is secured before
cleaning.
For best results, pretreat stains with a HOOVER® spot treatment (see HOOVER® Cleaning Solution Guide) to
help loosen and remove even the most stubborn stains. Distribute a generous amount of pretreat spray on spot,
stain, or high traffic area. Always follow specific directions found on solution label.
Wait 5-10 minutes before using machine.
STORAGE: We recommend leaving the product out to dry while sitting on an absorbent cloth prior to storage.
LUBRICATION: The motor is equipped with bearings which contain sufficient lubrication for their lifetime. The
addition of lubricant could cause damage. Do not add lubricant to motor bearings.
MAINTENANCE
WARNING: Risk of personal injury Turn power switch off and remove battery before cleaning or servicing.
WARNING: To reduce risk of fire and electric shock due to internal component damage, use only HOOVER®
cleaning products intended for use with the appliance as noted.
This product contains no serviceable parts. If appliance is not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, call customer service at 1.800.406.2005 prior to continuing use.
HOW TO CLEAN THE DIRTY WATER TANK
To Next Page
Loading...
