EasyManua.ls Logo

Hoover ONE PWR SPOTLESS GO - Before You Begin Cleaning

Hoover ONE PWR SPOTLESS GO
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Unwrap hose from unit. Select preferred tool and make sure it is attached securely.
NOTE: Read the directions on the HOOVER® Carpet Cleaning fluid prior to use.
CLEANING FLUID: SEE THE HOOVER SOLUTION GUIDE insert or visit Hoover.com/cleaning-solutions.
CAUTION: Not to be used for grooming a pet.
CAUTION: DO NOT USE THIS EXTRACTOR ON HARD FLOORS. USING THIS PRODUCT ON HARD FLOORS
MAY SCRATCH OR DAMAGE YOUR FLOOR.
Before You Begin Cleaning
Use your Hoover upholstery and spot cleaner only if upholstery fabric is marked with a “W” (for “wet” clean) or
“S/W” (for “solvent/dry” or “wet” clean). Don’t clean fabric marked “S” (“solvent/ dry” clean only).
Test for colorfastness in a small, hidden area. Gently rub surface with a dampened white cloth. Wait ten minutes
and check for color removal or bleed with a white paper towel.
NOTE: To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water
spray.
NOTE: To avoid damage to wood floors underneath area rugs or carpet, place waterproof material (e.g. plastic)
underneath them before cleaning.
OPERATION
CAUTION: Do not clean over floor electrical outlets. Water will drip from the tool after use and may puddle. To
avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave the
product on wood and laminate surfaces and move to a hard surface and (b) place unit on an absorbent material
(such as a towel) to soak up drips.

Other manuals for Hoover ONE PWR SPOTLESS GO

Related product manuals