Hoover Power Scrub Elite - Operating the Cleaner

11
MAINTENANCE
Remove both tanks
and tilt the carpet
washer so it is lying
on its back.
Lift the nozzle release
clip to unlock the
nozzle.
Wipe any dirt and
debris from the
mesh filter.
Hold the front of the
nozzle and push
down to release the
nozzle away from the
washer, once released
lift to remove.
Cleaning the SpinScrub filter
IMPORTANT: A blocked/dirty SpinScrub filter will cause the SpinScrub brushes to slow.
CWGDH012_Hoover MEA_Elite Power Scrub_Gladiator_UG_240818.indd 12 24/08/2018 11:47