Hoover Quest 700 - Cleaning the Main Brush

Troubleshooting
1. Turn off your
Quest
™
. Flip it
upside down to
access the 3 screws
as shown in the
image.
Unscrew and
remove the support
brush and main
brush. Remove any
stuck-on hair or lint.
Replace the brushes
back as shown.
Fasten the screws.
1 2 3 4
Cleaning Main Brush
18
WARNING
To reduce the risk of personal
i n j u r y - T u r n p o w e r s w i t c h o f f b e f o r e
cleaning or servicing.
! !