What to do if my Hoover Vacuum Cleaner Quest won't turn on?
If your Hoover Vacuum Cleaner Quest won't turn on, it could be due to a discharged battery. Check the battery indicator and charge the device if the battery is low. Alternatively, the power switch on the bottom of the Quest might be turned off; flip the power switch to the 'ON' position.
Why is my Hoover Quest 800 Quest not charging?
If your Hoover Vacuum Cleaner Quest isn't charging, ensure the AC adapter is properly plugged into both the docking station and the wall outlet. Also, check that the power button on the bottom of the Quest is switched ON. Finally, ensure the Quest is correctly docked so that the charging pins are aligned.
What does Error 3 mean on my Hoover Quest 800?
Error 3 on your Hoover Vacuum Cleaner, indicated by a blinking red LED, a solid blue LED, and two long beeps, suggests that the drive wheel, side brush, or main brush is stuck. Turn off your Quest and remove any dirt or hair from the wheels and wheel posts. It can also mean that the cliff sensors are detecting an object. Move the Quest to a different location and restart it. It may also indicate that the Quest's bumper is stuck.
What does Error 6 mean on my Hoover Quest 800?
Error 6 on your Hoover Vacuum Cleaner, indicated by blinking red and blue LEDs and continuous beeps of 30-second length, indicates that the dust bin is either not installed or installed incorrectly. Turn off your Quest and install the dust bin correctly.
What does Error 1 mean on my Hoover Quest 800 Vacuum Cleaner?
Error 1 on your Hoover Vacuum Cleaner, indicated by a blinking red LED and a solid blue LED, means the battery is too low. Charge your Quest.
General| Brand | Hoover |
|---|---|
| Model | Quest 800 |
| Category | Vacuum Cleaner |
| Language | English |
Guidelines for proper disposal of rechargeable batteries to prevent environmental harm and safety risks.
Instructions for battery collection, recycling, or disposal for the remote control.
Instructions for positioning and connecting the docking station correctly for optimal robot performance.
Step-by-step guide to cleaning the primary brush assembly for optimal performance and maintenance.
Instructions for removing and replacing the side brush for effective cleaning.
Procedure for replacing the battery in the remote control unit.
Details of the one-year limited warranty covering defects in material and workmanship for domestic use.
Steps to follow for submitting a warranty claim for the product or its battery.
To Next Page