Hoover Ranger 5241 - Maintenance and Cleaning; Emptying the Dust Bin; Filter Maintenance

14.
Maintenance
Emptying the Dust Bin
1. Press the Dust Bin Release
Button to remove the dust
bin.
2. Open the dust bin lid and
empty the contents into a
rubbish bin.
3. Close the dust bin lid and
reinsert the dust bin back
into the cleaner.
Cleaning & Replacing the Filters
1. Press the Dust Bin release
button to remove the dust
bin.
2. Open the dust bin lid and
empty the contents into a
rubbish bin.
3. The filters are located on the
dust bin lid. Remove the filters
and clean using the cleaning
brush provided. Alternatively,
replace the filters if required.
NOTE: it is recommended to replace filters every 6 months.
IMPORTANT! Ensure that the cleaner is switched off before preforming any maintenance.