This cleaner was inspected and packaged carefully before being shipped from the
factory. If you should happen to need assistance during assembly or operation, call
1-800-944-9200 for an automated referral of authorized service
outlet locations (U.S. only)
OR
1-330-499-9499 to speak with a representative in our Consumer
Response Center
OR
Visit us online at www.hoover.com to find the service outlet nearest you
(click on the "Service" button).
Carton contents
E ]
F-L
E
C
A B
Remove all parts from carton and identify each item
shown. Make sure all parts are located before dispos-
ing of packing.
A. Handle section
B. Cleaner body
C. Hose*, cleaning tools and wands (packed on cleaner)
D. Handle screw packet (in bag with owner's manual)
E. Powered hand tool (packed on cleaner)
_some models include an extra hose
imll
Note: The white switch lock above the ON/OFF switch aids
in the assembly of your cleaner. Assembly can be continued
if the switch lock is missing. However, do not remove the
switch lock until assembly is completed.
/
Looking at the back of the cleaner,
make sure switch (A) is in the OFF
position.
I
it may be necessary to move the
hose in order to attach the handle.
Slide handle into back of cleaner.
Push 4 screws into holes on back of
handle.
Using a Phillips screw driver, tighten
screws securely.
-f
II
Remove switch lock (B) above ON-
OFF switch (C) on front of handle by
pulling it straight out. Dispose of
lock.
If switch lock has come off during
assembly, make sure switch is in
OFF position (down) before plug-
ging cord into electrical outlet.
Remove label (D) from self-propel
button,
You are now ready to use
America's Best Cleaning Upright!
Continued -I_ 3
To Next Page
Loading...
Need help?
General
