Cleaner description
25</
21
Operate cleaner only at voltage specified on data plate on
bottom of cleaner.
26
27
The assembled cleaner will
look like the drawing.
1. Handle
2. Self-propel button
3. ON-OFF switch
4. Tool cover
5. Powered hand tool
6. Dusting brush
7. Furniture nozzle
8. Dirt cup latch
9. Dirt cup lid
10. Dirt cup
11. Dirt cup handle
12. HEPA cartridge filter
(inside dirt cup)
13. Pre-filter (inside dirt cup)
14. Final filter
15. Three-position handle
release pedal: step on
pedal to lower handle to
operating or low posi-
tions.
16. Nozzle control knob:
slide knob to correct
setting for height of car-
pet being cleaned.
17. Brush roll control
18. Furniture guard
19. Headlight
20. Edge groomers
21. Hose
22. Hose rack
23. 'Dirt FINDER'display
24. Embedded 'Dirt FINDER'
sensitivity switch
25. Cord hooks: wrap
cord around hooks for
storage. The top hook
can be rotated right or
left for easy cord
release.
26. Carrying handle
27. Extension wands
28. Crevice wand: stores in
reQr wand.
This cleaner is intended for household use.
ON-OFF Switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch (A) up.
To turn cleaner OFF, push switch down.
Polarized plug
Note: To reduce the risk of electric
shock, this appliance has a polarized
plug (one blade is wider than the other).
This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to
install the proper outlet. Do not change
the plug in any way.
Self-propel feature
This feature allows you to control how
quickly the Gleaner moves.
Note: The self-pr0pel feature oper-
ates 0nly when the cleaner switch
and the self propel button are both
ON.
To move forward, push handle for-
ward and guide cleaner away from you.
To m0ve backward, gently pull handle
back and guide the cleaner toward you.
Ouide cleaner carefully at first until you
have adjusted to the ease of operation.
For increased control in tight places
e.g., around and under furniture, non-
carpeted floors), slide the self-propel
button to OFFto deactivate the feature.
Ill
Transporting cleaner
To move your cleaner from room to
roorn, put handle in upright position, tilt
cleaner back on rear wheels and push
forward.
To Next Page
Loading...
Need help?
General
